Buckets

Tires are high-pressure vessels on which the wear is measured typically by measuring the depth of available tread with at least 3 points being taken across the face of the tire to provide a reasonable average. The overall condition of the tire will be inspected to identify any visible faults that could lead to failure.

In this day and competitive environment, if you have a great product, flaunt it with a convincing argument! Demonstrate your argument with a testimonial of performance. This can be done in the following steps Investment in placing product in the field Monitoring performance of the product in the field through inspection with data capture at

Excavators, Hydraulic Shovels and Rope Shovels spend most of their time digging and loading. They are only required to move short distances to reposition themselves or to move to a new area of excavation.   In the mining environment, most undercarriage inspections will utilize the machine hours to forecast the residual life of the components.

Undercarriage Chain is built to operate in a specific direction of motion, this is the forward direction in which the machine operates under load. When the chain is installed in the incorrect direction, the reverse direction, will cause wear at 3 times the rate of the forward direction.   It is thus critically important to

The Front and Rear Idlers on an elevated sprocket machine are effectively the spreaders for the track chain. The idlers keep the chain reasonably tensioned and guides the chain as it rotates. The track chain is essentially a rail that is laid down and picked up again in a continuous movement that allows the machine