Marketing the benefits of your Buckets and Trays can be strengthened with numbers of actual performance from the field. The bucket or tray has a certain capacity, but the difference between competitive products will come down to:- The above numbers can only be gathered by continual inspection and management of the bucket or Tray across […]
A Testimonial of performance lies in the numbers Read More »
The TrackTreads system provides “cradle to grave” Crack Management in Mobile Fleet Structures. There are 4 main steps covered in the management of these cracks Identification, measurement and setting of limits Field Inspectors capture, using mobile phones or tablets, the precise position of the crack on the structure by drawing the crack on a structural
Crack Management on Field Equipment Read More »
The Mobile tool to make collection of Field Inspection observations and measurements easy and accessible
TrackTreads puts Heavy Earthmover Inspections at your Fingertips Read More »
Tires are high-pressure vessels on which the wear is measured typically by measuring the depth of available tread with at least 3 points being taken across the face of the tire to provide a reasonable average. The overall condition of the tire will be inspected to identify any visible faults that could lead to failure.
Managing Undercarriage is more costly than Tires Read More »
In this day and competitive environment, if you have a great product, flaunt it with a convincing argument! Demonstrate your argument with a testimonial of performance. This can be done in the following steps Investment in placing product in the field Monitoring performance of the product in the field through inspection with data capture at
Great Products should be flaunted with Testimonial Data Read More »
Excavators, Hydraulic Shovels and Rope Shovels spend most of their time digging and loading. They are only required to move short distances to reposition themselves or to move to a new area of excavation. In the mining environment, most undercarriage inspections will utilize the machine hours to forecast the residual life of the components.
Using Propel Hours to Forecast Residual Undercarriage Life on Shovels Read More »
Undercarriage Chain is built to operate in a specific direction of motion, this is the forward direction in which the machine operates under load. When the chain is installed in the incorrect direction, the reverse direction, will cause wear at 3 times the rate of the forward direction. It is thus critically important to
Ensure Chain is Installed in correct Direction to avoid quick destruction Read More »
The Front and Rear Idlers on an elevated sprocket machine are effectively the spreaders for the track chain. The idlers keep the chain reasonably tensioned and guides the chain as it rotates. The track chain is essentially a rail that is laid down and picked up again in a continuous movement that allows the machine
Undercarriage Idler Failure can be detected to avoid further Damage and Expense Read More »
On the non-rotating sleeveless bushes, the wear on the bush is typically on only 180% of the bush as shown in the following diagram. Bush Life before Turning The speed of wear on the bush will be determined by various factors such as:- the abrasiveness of
Bush Turn Budgets ensure Turning of the Undercarriage Bushes are not Missed Read More »
Technology is everywhere today, being used to increase efficiency and reduce costs. Undercarriage Management is no different and any customer operating tracked machines is using Undercarriage Management and Asset Wear Monitoring Systems to track the condition and performance of their components and plan maintenance activities. OEM’s or Manufacturers and their dealer network are using these
Independent Undercarriage and Asset Wear Monitoring Systems Read More »